Tegras pneumatic brushing robot
39-47
maintenance and care
Lubricating the head’s pneumatic motor:
2
To be able to carry out maintenance tasks on the head, the head must be disassembled. One of the
maintenance tasks is lubricating inside the pneumatic motor. Changing parts over will be carried out at
Teinnova’s facilities by the company’s technical personnel.
To disassemble the head, the four fixing screws shown in the image
must be removed. To remove them, turn them anti-clockwise.
To lubricate the inside of the pneumatic motor in the head, pour
two or three drops of oil into the openings, as shown in the image.
Remove the head as shown in the image.
We advise that you use oil with an SAE 20
classification in order to correctly maintain your
TEGRAS MULTIPRO’s motor.
