10 TEGAM WAY • GENEVA, OHIO 44041 440-466-6100 • FAX 440-466-6110 • www.tegam.com
4-2
Section IV - Operating Instructions
Figure 4.2 Select a Measurement Method
In the Select Measurement Method form, PS-Cal displays a list of available Measurement Methodologies
in the top section. As you select each Measurement Methodology, PS-Cal updates the lower section of the
form with the details of the Measurement Methodology. Once you have decided on the Measurement
Methodology, select it and press Continue.
NOTE: For Cal Factor tests using the TEGAM 1806(x) Type IV Power Meters or the 1830A RF Thermistor
Power Meter, select from the RFBridge_Multirun methodologies.
Since each Measurement Methodology has differing standard requirements, PS-Cal prompts you for each
standard required by the Measurement Methodology. In the Select Compatible Driver form, PS-Cal
displays a list of configured instruments/drivers compatible with Measurement Methodology. If you do not
see your standard/driver in the list, it may not be configured. You can edit the station configuration by
Figure 4.3 Select a Compatible
Driver
