Tefcold MTF Series, User Manual

Page: 13 / 40

13
EN
4 – USAGE OF THE
EQUIPMENT
4.1 – OPERATION OF THE
EQUIPMENT
Plug in the operating cable of your
equipment, the final positioning of
which you have done. There is no other
on/off key of your equipment. It will
start operating when plugged in.
A slight sound of compressor will be
heard when your equipment is started.
This sound shows that the cooling
system has started operating.
4.2 – THERMOSTAT
ADJUSTMENTS (IWP 760)
4.2.1–
GENERAL INFORMATION
AND INSTRUCTIONS
The inner temperature of your
equipment is adjusted with the
thermostat on your equipment
(Image I I ) .
4.2.2– IWP 760 THERMOSTAT
SETTINGS
IWP 760 model thermostat
is used in DS/DF models. The
explanations regarding the symbols on
the thermostat and general information
about the settings are given below.
Thermostat image is given in Image I I .
Keys;
1- [ ]/Defrost: Press and release;
increases the sliding values or enables
switching between the Menu options.
When pressed and held for at least 5
seconds, Manuel Defrost Cycle starts.
2- [ ]/Light: The inner menu status;
reduces sliding values or enables
switching between the Menu options.
When press the this button and the
light turns on/off.
3- [ ]/(Esc): Press and release;
enables to return to the previous menu
and to confirm the parameter value.
When pressed and held for at least 5
seconds, all functions are turned off
except of the lights (Standby on).
4- [ ]/(Enter): Press and release;
displays the alarms and opens the
submenus (if any). When pressed
and held for at least 5 seconds, the
programming menu is opened. Confirms
the commands.