3
2
Turn the OTG bottle (E) upside down and put it correctly on the motor
unit (D). Lock it by rotating it in the clockwise direction until the arrow on
the locking ring (E5) is opposite the padlock on the motor unit. A bottle
logo(F2) will appear on the screen (Fig. 12) and a bip signal will sound.
USING YOUR APPLIANCE
Speed /
Programs
Instructions
Speed 1 to 6
When the jar is on the base and when lid is correctly locked a bip signal will sound.
Turn the button to the right to start blending from speed 1 to 6 a bip will sound
at each step.
Timer starts from 0:00 and goes up.
To pause, touch “Start/Stop” a bip will sound and the speed lights will blink.
To resume, touch “Start/Stop” 1 bip will sound and light will turn on
To stop, turn the button back to the left on position 0 or maintain “Start/Stop”
for 3 seconds, a long bip will sound. The light goes back to 0 position.
Programs
Turn the button to the left a bip will sound for each position, a light will turn on
for each position, a timer display for each program (Fig.13).
On each program position, Start/Stop light blinks.
To start a program, touch Start/Stop and 1 bip will sound (Fig.14).
To pause, touch Start/Stop a bip will sound, the program and Start/Stop lights
will blink.
To resume, touch Start/Stop a 1 bip signal will sound, program and Start/Stop
lights will turn on.
To stop, maintain the Start/Stop for 3 seconds long bip signal will sound and light
will go back on 0 position.
Timer starts from the program time (ex : 1:30) and counts down
To indicate the end of the program 3 bips will sound (program and Start/Stop
light blink) and light will go back to 0 position
Pulse function
Turn the button to the left on the “pulse” position a bip signal will
sound and Start/Stop light will blink.
Touch then hold Start/Stop to activate pulse immediately (there is no
lag time between touch and the start of blending)
Release finger from Start/Stop to stop (Start/Stop light will blink)
ASSEMBLING AND FITTING THE JAR
Moisten the seal (C1) (even if already fitted on the blades unit (C2)). Be careful to
correctly fit the seal (C1) back onto the blade unit (C2) the correct way up (Fig 1).
Place the blades unit (C2) on the locking ring (C3) (Fig 2). Turn the jar upside
down and fit the assembled locking ring (C) with blades on the base of the
jar (Fig 3). Lock it by rotating to lock ring (C3) in the clockwise direction (Fig.
3). Make sure the locking ring is locked correctly: the arrow on the jar must be
aligned with the arrow on the locking ring (Fig 3).
To help you, you can use the back of the brush (H) to lock or unlock the locking
ring (C3)
Add the ingredients into the assembled jar without exceeding the maximum
level indicated (Fig. 4):
• 1.75 L for thick mixtures
• 1.5 L for liquid preparation
Warning : Do not pour boiling liquids (over 80°C/176°F)
into the jar
Lock the lid (A) on the jar (B) and turn it in the clockwise direction (Fig. 5).
Make sure the lid is locked correctly: the point on the lid should be aligned
with the padlock on the handle (Fig. 6). Put the assembled cap (A3+A4)
in position on the lid and lock by rotating it in the clockwise direction.
If the lid is not correctly locked, your appliance will not start. Put the jar
correctly on the motor unit (Fig 7): the point on the base of the jar should
be aligned with the padlock on motor unit (Fig. 7). A jar logo (F1) will
appear on the screen (Fig. 7) and a bip signal will sound.
ASSEMBLING AND FITTING THE ON THE GO BOTTLE
Moisten the seal (E3) (even if already fitted on the blades unit (E4)). Be careful
to correctly fit the seal back onto the blades units the correct way up (Fig. 8).
Add the ingredients into the bottle without exceeding the maximum level
indicated (Fig.10):
• 400 ml for thick mixture
• 600 ml for liquid preparation
Warning : Do not pour boiling liquids (over 80°C/176°F)
into the bottle.
Put the blades unit (E3+E4) on the locking ring (E5) (Fig 9).
Place the assembled blades unit on the top of the bottle (E2) and lock it
by rotating in the clockwise direction (Fig 11)
Make sure the blades unit is well locked: the arrow on the locking ring (E5)
should be aligned with the arrow on the bottle (Fig. 11)
EN
