TEFAL EVERYDAY IH202, Manual

Page: 19 / 21

35 34
EN
Optional: adjust the cooking time using the timer function (refer
to dedicated section after)
• At the end of the preset cooking time the appliance automatically
turns off. It makes a beep sound and displays ‘- - - -’ or ‘Hot’ if
the ceramic plate is still hot (exceeds 50
O
C
).
Optional: press [Start/ Stop] button to stop the appliance at any
time.
Timer function
The Timer function is available for all programs from 1 minute
(screen displays ‘0:01’) to 6 hours (screen displays’6:00’).
• After selecting a program, press [Timer/Heat setting] button
the timer indicator turns on and the screen displays time
flashing.
• Adjust the time by pressing [-] button to decrease the time or [+]
button to increase the time. (If press short, the time will change
1 minute by 1 minute, if press long, the time will change 10
minutes by 10 minutes). After 3 seconds the time stops flashing
and the countdown starts.
• At any moment of the cooking process the timer can be
readjusted by pressing [-] or [+] button.
• To exit timer setting mode and return to heat setting mode,
press [Timer/Heat setting] button the timer indicator
turns
off and the heat indicator turns on, the screen displays
heating level or temperature (according to program). The timer
is still running in the background.
• At the end of the countdown, the appliance stops automatically,
it makes a beep sound and displays ‘- - - -’ or ‘Hot’ if the ceramic
plate is still hot (exceeds 50
O
C
).
Note for all programs:
• Cookware detection: if no cookware or no suitable cookware
is sensed on the ceramic plate when launching a program,
the internal detection system will generate an alarm and error
message E1 on screen.
• 1h automatic shut-off: if no timer has been set, the appliance
will automatically stop after 1 hour.
• When the appliance stops, the fan may continue to operate, it is
normal and aims at cooling down the ceramic plate.
• It is recommended to begin a cooking program when the
appliance is cool, otherwise cooking results may be affected.
4. Turn off the appliance
• When the appliance is in standby mode (screen displays ‘- - - -’
or ‘Hot’ if the ceramic plate is still hot), after 5 minutes without
any action, the appliance automatically turns off.
• To turn off the appliance, press [Start/Stop] button for 3 seconds.
5. Clean the appliance
• Unplug the power cord and wait until the ceramic plate has
cooled down before cleaning.
• Clean the ceramic plate and control panel with a damp
soft cloth or a cleaning product which is designed for use on
induction cookers. In case of tough stains, wipe away the stains
with neutral detergent and then clean with damp soft cloth.
• Clean the body with a damp soft cloth making sure no water
enters inside the appliance.
• Remove any dust from the air entry / air exits with a cotton bud.
Some scratches and dark stains on the ceramic plate may not be
able to be removed. These however do not affect the operation of
the appliance.