8
Problems
Possible
causes
Solutions
There is no steam.
The steamer is not
plugged in.
Check that your appliance is
correctly plugged in.
The water level is too
low.
Unplug your appliance and refill it.
The steam button
has not been primed.
Press the steam button
continuously for a few seconds to
begin steaming.
You use the
appliance for the first
time.
When the appliance is new, press
the steam button a few times.
The water tank is not
in place.
Ensure that the water tank snaps
in when put into place.
The appliance does
not heat.
It is not plugged in.
Plug in your appliance.
Water leaks or spits.
The water tank is not
in place.
Be sure that the water tank snaps
when put into place.
Your appliance is not
hot enough.
Allow your steam brush to heat
for approximately 30 seconds
before using.
The dual voltage is
not set correctly
Ensure that the dual voltage
selector is in correct voltage
position before operating. Unplug
the appliance and switch the
selector to the correct voltage.
There is not enough
power or too much.
The dual voltage is
not set correctly.
Ensure that the dual voltage
selector is in correct voltage
position before operating. Unplug
the appliance and switch the
selector to the correct voltage.
IS THERE A PROBLEM ?
Environment protection first !
Your appliance contains valuable materials
which can be recovered or recycled.
‹
Leave it at a civic waste disposal centre.
For any product problems or queries, please visit our website -
www.rowenta.co.uk
or contact our Helpline on 0845 602 1454 - UK (01) 461 0390 - Ireland
1800136195 DR50XX_105x148,5 05/05/15 11:51 Page8
