6
Steaming clothes
The Ultra Steam is equipped with
a clothes brush
•
To attach the accessory, line it
up with the steam head. It locks
into position with an audible
click -
fig.9
.
•
Simply pull on the top of the
clothes brush to remove it. You
can operate the unit with or
without the accessory.
•
Hang the creased article of
clothing on a clothes hanger
•
Pull the clothing tight with one
hand and place the appliance
over
the
creased
area,
beginning at the top of the
garment.
•
Gently press the fabric brush
against the clothing and move
the steambrush down the fabric.
Keep pressing the burst of
steam button-
fig.10
.
•
The combination of steam and
brush will gently remove the
creases.
•
After treatment, let the garment
cool down on the hanger before
wearing.
Lint pad
Threads, lint and hair can easily be
removed with the lint pad by
brushing the clothes slowly from
left to right.
The pad can be cleaned by
brushing in the opposite direction
right to left on a piece of old cloth.
Test fabric for color fastness
in an unobtrusive part of the
garment (inner seam). Do not
touch silk or velvet with
steam head. Some articles
can be steamed better from
inside. Heavier fabrics may
require repeated steaming.
Exercise caution at all times.
For very delicate fabrics, you
can remove the brush. To
avoid damage to clothes,
keep a distance of 1,5 inches
between the steam head and
the fabrics. We recommend
that before the first use or
after the appliance has been
stored for some time to test
the burst of steam on an old
cloth.
Before removing or attaching
the steam brush, unplug your
appliance and let it cool down.
The lint pad must not be used
when attached to appliance.
As steam is very hot: never
attempt to remove creases
from a garment while it is
being worn, always hang
garments on a clothes hanger.
1800136195 DR50XX_105x148,5 05/05/15 11:51 Page6
