11
STEP 5
Attach Angle Tether & Head Pillow
Attach Angle Tether
• The tether will come pre‑assembled to the A‑Frame.
• Unfold the adjustable tether and clip it to the U‑Bar on the
underside of the Table Bed (Figure 22).
• Slide the buckle to lengthen or shorten the strap depending on
your desired maximum angle of inversion.
Attach Head Pillow
Attach the Head Pillow by securing the Velcro Straps through the
specified holes in the Table Bed (Figure 23), which allow the pillow
to shift with the user when in use. You may also customize the
position depending on your preference.
LENGTHEN
SHORTEN
For All Models
FIGURE 22
FIGURE 23
The EP‑560 is shown here. Your actual model may vary.
EZ-Angle Tether Accessory
Some models may come with the EZ‑Angle Tether, embroidered
with color‑coded angle markers at 20
°
(GREEN), 40
°
(ORANGE),
or 60
°
(RED). Simply slide the buckle so its center aligns with your
desired color setting.