8
www.teejet.com
UniPilot
®
Pro
UniPilot Pro Anti-Rotation Bracket Installation Procedure
NOTE: The ESD is attached to the steering wheel prior to installation of the bracket kit.
1. Make sure that you have all of the required parts. Figure 15
2.
Attach front bracket to the fifth wheel slider bracket using the two
bolts (slider attaching bolts). Tighten finger tight.
NOTE: The slider bracket will require adjustment once
installed on the steering column.
Figure 16: Slider Attachment Bolts
Front Bracket
Fifth Wheel Bracket
3.
Place the flange bearing assembly over anti-rotation pin.
NOTE: It is important that the anti-rotation pin is placed
through the flange bearing before attaching the Fifth Wheel
Bracket
Figure 17: Anti-rotation Pin Engagement
Anti-rotation Pin
4. Attach the back bracket to the front bracket using the four
machine screws clamping the steering column between the front
and back brackets.
Figure 18: Back Bracket Installation
5. Tighten the clamping assembly.
6.
Adjust the position of the fifth wheel slider so the flange bearing
is approximately in the middle of the anti-rotation pin and tighten
the bolts (Slider attaching bolts).
Figure 19: Slider Bracket Engagement
7. The bracket installation is complete.
