background image

6

www.teejet.com

BoomPilot

®

Vehicle Type

Vehicle Type selects the type of vehicle steering that most closely 

represents your vehicle. Default is Front Wheel.
1.  Press DOWN arrow   to access the list of options.
2.  Select vehicle type.

Figure 1-11: Vehicle Type

Config-> Vehicle

12.50 ft

0.00 ft

Backward

Vehicle Type

Ant Height

Dir to Boom

Dist to Boom

Front Wheel

Front Wheel
Articulated
Tracked

Antenna Height  

Antenna Height sets the height of the antenna from the ground. Range 

is 0.0 - 32.8 feet / 0.0 - 10.0 meters. Default is 12.5 feet / 3.81 meters.

NOTE:  This setting is required for auto steering and tilt sensor 

operation. 

1.  Press the KEYPAD icon  .
2.  Use the entry screen to establish the antenna height.

Figure 1-12: Antenna Height

Config-> Vehicle

12.50 ft

0.00 ft

Front Wheel

Backward

Vehicle Type

Ant Height

Dir to Boom

Dist to Boom

Antenna Height (ft)

1

2

3

12.50

Clear

4

5

6

<--

7

8

9

0

.

+/-

Direction to Boom 

Direction to Boom sets whether the boom is located behind or in 

front of the GPS antenna as the vehicle moves in a forward direction. 

Default is Backward.
1.  Press DOWN arrow   to access the list of options.
2.  Select:

►Backward – indicates the boom is located behind the GPS 

antenna

►Forward – indicates the boom is located in front of the GPS 

antenna

Figure 1-13: Direction to Boom

Config-> Vehicle

12.50 ft

0.00 ft

Front Wheel

Vehicle Type

Ant Height

Dir to Boom

Dist to Boom

Backward

Backward
Forward

Distance to Boom 

Distance to Boom defines the distance from the GPS antenna to the 

boom. Range is 0.0 - 164.0 feet / 0.0 - 50.0 meters. Default is 0.0 feet / 

0.0 meter.
1.  Press the KEYPAD icon  .
2.  Use the entry screen to establish the distance from the GPS 

antenna to the boom.

Figure 1-14: Distance to Boom

Config-> Vehicle

12.50 ft

0.00 ft

Front Wheel

Backward

Vehicle Type

Ant Height

Dir to Boom

Dist to Boom

Dist to Boom (ft)

1

2

3

0.00

Clear

4

5

6

<--

7

8

9

0

.

+/-

Summary of Contents for Matrix Pro 570G

















Reviews: