15
98-05242-ENUS R4
Matrix
®
Pro GS
options: Steering Wheel Sensor
Steering wheel sensor selects whether the sensor used to automatically
disengage FieldPilot when the steering wheel is turned is magnetic or
pressure based. Check your specific configuration to determine if a
Steering Wheel Switch Kit or a Pressure Swich is being used.
The UniPilot is not affected by this setting.
1.
Select
Options
.
2. Press DOWN arrow to access the list of options.
3. Select:
►Magnetic
►Pressure
Figure GS-27: Options: Steering Wheel Sensor
Magnetic
Pressure
Steering angle Sensor
Steering Angle Sensor is used establish the Steering Angle Sensor
(SAS) as the primary feedback sensor for auto steering.
1.
Select
Steering Angle Sensor
.
2. Select if the steering angle sensor is
►Enabled
►Disabled.
3. Select from:
►Sensor Calibration – sets the turn rate when steering the vehicle
left and right
►On Line Calibration – adjusts the path of travel to the established
guideline when auto steering is tuned well and the vehicle
maintains a straight line, but the vehicle hangs off the guideline
to one side or another
Figure GS-28: Steering Angle Sensor
