Tecsun R-108, Operation Manual

Page: 15 / 27

www.tecsunradios.com.au
12
2. Press & hold / button to auto browse those stored stations
until you hear a sound of “Be--”;
3. Press the [DELETE] button at anytime in auto browse to direct
delete the unwanted station ; the radio will keep on auto browsing to
the next available station until you press any other button to stop
this function.
Note: This function is especially suitable for organizing store memory.
METHOD 3: MANUAL DELETES ALL MEMORY WITHIN
THE BAND
1. Press the [VM/VF ] button until “ PRESET ” flashing
2. Press & hold the
[DELETE]
button for 3 seconds and notice
“
ALL DEL
” appears on the upper right corner of the display;
3. Press the [DELETE] button to delete all memory within the
selected band.
Note
：
If you do not press the [DELETE] button for 3 seconds to
confirm, the radio will automatically exit the delete operation.
►SLEEP FUNCTION
The radio is turned on by default to “120” (120 minutes), you
can adjust the auto power off time as needed;
1.Press& hold
[POWER]
button until “ ” flashing on the display
；
2. Rotate the [TUNING] knob immediately to select sleep timer from
1 ~ 120 minutes or select permanently “ ON ”;
3. Then wait until the radio auto turn on to confirm the setting.
►CLOCK SETTING
Set local time
1. Press & hold the [TIME] button until hours flashing, then rotate
the [TUNING] knob to adjust the hour;
2. Press the [TIME] button, then rotate the [TUNING] knob to
adjust the minutes while minutes is flashing;