Tecsun R-108, Operation Manual

Page: 10 / 27

www.tecsunradios.com.au
7
DELETE MEMORY (Refer to 11)
1. Select your desired band by pressing [BAND] button ;
2. Press the [VM/VF] button to switch into frequency mode, switch
to address status;
3. Press & hold the [DELETE] button until “
DEL”
and “
memory
address
” flashing;
4. Rotate the [TUNING] knob to select the memory that you want to
delete;
5. Press the [DELETE] button to remove the unwanted
memory address .
AUTO BROWSE MEMORY (Refer to 11)
1. Select your desired band by pressing [BAND] button;
2. Press the [VM/VF] button to switch into frequency mode, switch to
address status, with memory address number flashing;
3. Press & hold
/
button, auto scan from one memory to
another, staying on each station for about 5 seconds.
4. To stop auto search memory, simply press the
/
button.
SQUELCH SETTING (Refer to 17)
1. Press the
[POWER]
button to turn on the radio and select your
desired band by pressing [BAND] button
；
2. Press & hold [SQUELCH] button
，
Switch to the signal strength
selection page
；
3. Rotate the [TUNING] knob to select signal strength
；
4. Press the [SQUELCH] button again to confirm
SWITCH SOUND MODE (Refer to 16)
1.Turn on the radio and select any band you desired
；
2. Press & hold number“4” button
，
and then switch the sound mode
MUSIC/VOICE.
TUNING SPEED SETTING (Refer to 17 )
1. Turn on the radio and select any band you desired
；
2. Press the [SQUELCH] button to select Fast/Slow speed or
select Stop to lock station.