Tecsun R-108, Operation Manual

Page: 11 / 27

www.tecsunradios.com.au
8
►HOW TO TURN ON/OFF THE RADIO
1. Open the battery compartment located on the back of the radio;
Install 1 x BL-5C batter y. Close the battery door. The LCD display
shows the battery level, time and other symbols
2. Press the
[POWER]
button to turn on/off the radio.
Note:
If the radio does not turn on, please check if the batte ry were
installed correctly, or the battery capacity is sufficient and the lock
function has not been turned on.
(Press & hold the [ ] button to unlock.)
►TUNE INTO STATIONS
Press the
[POWER]
button to turn on your radio, and then select your
desired band by pressing the [BAND] button. In case of receiving FM/ SW
broadcasting, fully extend the telescopic antenna for a better reception.
When receiving MW (LW) broadcasting, please rotate the radio or change
it's location to achieve optimum reception.
Rotate the [VOLUME] button to adjust the volume.
Now, you can turn into your favorite stations with any of the below
tuning methods:
METHOD 1 : MANUAL TUNING
1. Press the [VM/VF] button to switch into frequency mode, and
hear a sound of “Be---” with “
PRESET
’’ flashing;
2. Rotate the [TUNING] knob to search your desired station.
METHOD 2 : DIRECT KEYPAD ENTRY
1. Press the [FREQ] button, you can hear a sound of "Be---"
；
2. Press the numeric keys
[0] - [9]
to enter the station frequency
directly
.