P. 14
Tecshow Stratus Fazer |
11. DMX CHANNELS
12. MAINTENANCE
Channel 1 – Output
• The Stratus fazer requires almost no mainte-
nance. However, you should keep the unit
clean. Disconnect the mains power supply, and
then wipe the cover with a damp cloth. Do not
immerse in liquid.
• Please clean internal components once a year
with a light brush and vacuum cleaner. Do not
use alcohol or solvents.
• Keep connections clean. Disconnect electric
power, and then wipe the connections with a
damp cloth. Make sure connections are thor-
oughly dry before linking equipment or supply-
ing electric power.
• Do not allow the fog liquid to become contami-
nated. Always replace the caps on the fog liquid
container and the fog machine liquid tank
immediately after filling.
•
After every 40 hours of continuous operation,
it is recommended to run a cleaning solution
composed of 80% distilled water/20% white
vinegar through the system to prevent the ac-
cumulation of particulate matter in the heating
element.
•
When cleaning, use only a clean, lint-free soft
cloth. An effective cleaning regimen is as fol
-
lows:
1. While unit is unplugged and cool, unscrew
nozzle at very front of unit and clean out debris
with vinegar and a pipe cleaner, making sure
that the hole is free of clogs.
2.
Empty all fog fluid from machine. Add cleaning
solution to tank. Plug unit in and begin warm
up.
3. Run unit in a well ventilated area until tank is
empty.
4.
Replace nozzle and refill with liquid.
Performance Notes
• All fog machines develop condensation around
the output nozzle. Because this may result in
some moisture accumulation on the surface be
low the output nozzle, consider this condensa-
tion when installing your unit.
• Fog machines may sputter small amounts of fog
occasionally during operation and for a minute
or so after being turned off.
•
All fog machines have a recycling period after
bursts of fog, when the machine will shut itself
down for a short period in order to heat back up.
• During this time no fog can be produced.
Replacing a Fuse
Power surges, short-circuit or inappropriate elec-
trical power supply may cause a fuse to burn out.
If the fuse burns out, the product will not function
whatsoever. If this happens, follow the directions
below to do so.
1. Unplug the unit from electric power source.
2.
Insert a flat-head screwdriver into a slot in the
English version
