Basic manual for CP-1004 module
TXV 110 04
20
MR-01xx
CH2
Obr.8.1 Placement of a plug-in submodule with serial interface onto the middle board of the ba-
sic module
9. MAINTENANCE
When following general installation instructions are kept, the module does not require any
other maintenance. Should dismantling of some part of the module be necessary, supply volt-
age must always be OFF.
Since the module contains semiconductor components, it is necessary to
follow the principles for working with components sensitive to electrostatic
charges when handling the cover taken off. It is strictly prohibited to touch
printed circuits directly without protective measures!!!
10. GUARANTEE
The guarantee and complaint conditions are governed by the Business conditions of Teco a.s.
Attention:
Before switching the system on, you must fulfil all the conditions contained in this documenta-
tion. The system must not be put in operation, if it is not verified and confirmed that the equip-
ment in which the Foxtrot system is part of it, meets the requirements of the directive
89/392/CEE, if the directive applies to such equipment.
We reserve the right to make modifications and/or changes of the documentation without
prior notice.
Teco a.s.
Havlí
č
kova 260
280 58 Kolín IV
Czech Republic
URL:
www.tecomat.cz
e-mail: [email protected]
Summary of Contents for CP-1004
Page 2: ......
