IP2061 Administration Manual
Page 40 of 66
pick up the call automatically.
Enable DND
Turn on “Do Not Disturb” function. When it is enabled, all
incoming call will get busy tone when they make call to this
phone number.
User can also press *4 (feature access code) to enable DND
function.
Enable CLIP
Turn on the CLIP (Calling Line Identity Presence). The caller
ID of incoming call will show on LCD.
Enable Call Waiting
When Call Waiting function is enabled and user is in talk
state, phone can allow other incoming calls. It flashes the
line key LED and Call Waiting Tone (If Call Waiting Tone is
enabled) to indicate user. If it’s disabled, when user is in talk
state, other incoming caller will get busy tone.
User can also press *98 (feature access code) to enable Call
Waiting function.
Enable Call Waiting Tone
Turn on the Call Waiting Tone function. At talk state, a beep
tone will indicate user every 10 seconds when another call is
ringing in.
Enable Hold Reminder
Turn on the Hold Reminder function.
Hold Reminder Time (sec)
When a call is held, phone will remind user with a beep tone
every this time period.
Dial Timeout (sec)
Set the timeout to automatically end dialing.
Enable Block Anonymous
Turn on to block the incoming call without Display Name.
LCD backlit Time
Set the LCD backlit time.
Hotline Delay Time
Set the delay time to activate the hotline application.
Hotline Number
Set the destination of the hotline application.
