IP2061 Administration Manual
Page 18 of 66
Basic Call Features
Operation
Description
1.
Pick-up the handset. You will hear dial tone
played.
2.
Use the keypad to dial the phone number. Press
ENTER key or “Dial” softkey to dial out
immediately, or wait for a while (Dial Timeout
setting) for auto-ending the dial. Phone will send
out the dialed number to IG6600. IG6600 will
route the call to destination.
Note: You could use the “Backsp” softkey to
delete the last digit.
3.
Start talking to called party.
4.
On-hook the handset when your conversation is
over.
Making a Call
There are three mode to establish a call for this IP phone, handset
mode, hands-free mode and headset mode. In this manual, only
handset mode is used for example. In the following features, you can
replace
to hands-free mode by pressing
key or headset
mode by pressing
and
key. When the conversation is
over, press
key again to release call. For headset mode,
please prepare a headset first.
1.
Pick-up the handset. You will hear dial tone
played.
2.
Press the line key. The LED of line key will light
up and the specific trunk line will be engaged.
Use the keypad to dial the target phone number.
Press # key to dial out immediately, or wait for a
while (Dial Timeout setting) for auto-ending the
dial.
3.
User can also dial the PSTN or IP trunk access
number which the IG6600 registered. For
detail about IP and PSTN trunk, refer to
IG6600’s manual.
Note: You could use the “Backsp” softkey to
delete the last digit.
Making a Call via
Specific Trunk
4.
Start talking to called party.
