IG7600 Smart Telephone System Quick Installation Guide
-3-
Network Configuration Choices
Connecting to an Existing Network:
Connect the WAN port of your
IG7600
to your existing network, leaving the LAN port
disconnected after using it for the initial installation programming. (You need to enable
UPnP server setting in router or setup router’s DMZ to
IG7600
.)
Remote Phones Connecting to an Existing Network:
Obtain a static IP address from your Internet Service Provider (ISP) or use dynamic IP
address with Dynamic DNS. (Please check IG7600 Administration Guide for the further
information.) Connect the WAN port of your
IG7600
to a dedicated network switch
(purchased separately) and enter the Static IP address in the WAN programming of the
IG7600
, without connecting the LAN.
IP2061
or
IP3062
should be pre-configured SIP
Proxy settings as
IG7600
’s WAN IP address (Please check IP2061 and IP3062 manuals
for the further information).