IG7600 Smart Telephone System Quick Installation Guide
-4-
Using the IG7600 as a Router and Connecting Remote Phones:
Obtain a static IP address from your Internet Service Provider (ISP) or use dynamic IP
address with Dynamic DNS. (Please check IG7600 Administration Guide for the further
information). Connect the WAN port of your
IG7600
to the ISP Modem and use the LAN
port to connect all of your phones and computers.
Connecting Telephone Lines:
You can connect up to four (4) analog (standard or PSTN) telephone lines to your
IG7600
.
Connect one line to each port, in the order that you want them to ring 1 – 4.
In this configuration you should
contact your ISP and have them
place their modem into bridge mode,
allowing the
IG7600
to authenticate
directly to the ISP.
Telephone
Company
Use the telephone line
cords to connect the
telephone lines to the
IG7600
.
