N3 Drive Operations Manual
Keypad Functions & Navigation; Key Functions
24
17.3 Key Functions
The keys are multifunctional, providing for both control of the inverter
when keypad mode is
selected (default)
and
access in setting various parameters. The key functions are as
follows.
Table 17.2
UP / DOWN
·
Sets the inverter output frequency when using the keypad mode.
·
Sets the
value
of the 4 display digits to set the *
A
and
b
parameters.
* Access to the
A
parameters must be
enabled
. (see Sec. 17.4.3)
RUN / STOP
·
Controls the output of the inverter when selected in the keypad mode. It is an
on /
off
toggle function.
DISPLAY / FUNCTION
·
Toggles the display between the inverter output selected value (Hz etc.) and the *
A
and
b
parameter lists. Also when
AMPS
and or
VOLTS
are selected for display, the
key will sequence through to display Hz/RPM, A and b parameter lists, AMPS or
VOLTS.
READ / ENTER
·
Used to
READ
and /or
save
(
ENTER
) *
A
and
b
parameters.
STOP
RUN
FUN
DSP
FWD
REV
FWD / REV
·
Controls the direction of the motor ( inverter output) when selected in the keypad
mode. It is an
on / off
toggle function.
·
Used in conjunction with the
RESET / SCROLL
key to toggle between
Local
and
Remote
operation.
RESET
RESET / SCROLL
·
Resets the inverter after a fault
·
Scrolls through the
position
of the 4 display digits to set the *
A
and
b
parameters.
·
Used in conjunction with the
FWD / REV
key to toggle between
Local
and
Remote
operation.
READ
ENTER
!
CAUTION
Do not use any sharp or potentially damaging objects to operate the keypad.
NOTES:
