23
※
Wiring Description of Inverter
Loose six screws under the Inverter (as the red circle), after open it, there are two terminal block
and
node label.
L and N are connected to utility AC power. R,S,T are connected to Wind turbine AC output.
PE is grounding wire.
The wire connected to L is recommended to use 12 AWG and above. Suggest using brown color.
The wire connected to N is recommended to use 12 AWG and above. Suggest using blue color.
The wire connected to R is recommended to use 12 AWG and above. Suggest using red color.
The wire connected to S is recommended to use 12 AWG and above. Suggest using white color.
The wire connected to T is recommended to use 12 AWG and above. Suggest using black color.
The wire connected to PE is recommended to use 12 AWG and above. Suggest using green color.
Wiring show as below figure
：
brown
blue
green
red
gray
black
brown
blue
green
red
gray
black
