Tecnoware ATA 4.0 MM, User Manual

Page: 8 / 124

ENGLISH
User’s manual 2 ATA Energy Storage System MM
1 Introduction
The ATA ENERGY STORAGE SYSTEM (ATA means Uninterruptible Power Supply) is the result of constant technological
research aimed at obtaining the best performance at the lowest cost.
ATA ENERGY STORAGE SYSTEM is an inverter with storage system and single-phase sinewave UPS functioning built
specifically to protect and supply the most sophisticated electronic equipment: it provides to make an absolutely
continuous power supply, regulated and free to any kind of interference (black-out, under voltage, over voltage,
surge, spike,
micro interruptions, interference).
The security for the load is guaranteed, also if occurs an overload status or an inverter failure, thanks a static bypass
that exclude ATA ENERGY STORAGE SYSTEM and connect the loads directly with the AC input main.
ATA ENERGY STORAGE SYSTEM is equipped with a communication interface RJ45 and USB that can be used to
communicate with the software WatchPower.
Read this manual carefully before using the ATA ENERGY STORAGE SYSTEM; it includes
important safety warnings and useful advices for correct use and installation.
ATA ENERGY STORAGE SYSTEM is constantly being developed and improved: consequently, your unit may differ
somewhat from the description contained in this manual.
This manual includes the following models:

ATA Energy Storage System 4.0 MM (4000VA, 3200W, 3750Wp max from PV)

ATA Energy Storage System 5.0 MM (5000VA, 4000W, 3750Wp max from PV)
In this manual ATA ENERGY STORAGE SYSTEM will simply be referred to as ATA.
ATA ENERGY STORAGE SYSTEM models are made from a single unit that contains the electronics inner parts.
However ATA ENERGY STORAGE SYSTEM models are predisposed to the connection with external BATTERY BOX.