Auxiliary functions (available on CR versions only)
The unit has 8 auxiliary functions, as described below:
-
Aux1 is used for Wiper activation only (this function will activate the wiper for approx. 10 seconds).
-
Aux2 is used for Washer pump activation only (this function will activate the washer pump for approx. 5 seconds).
-
Aux3 is used for Wash-Wiper STOPPABLE automatic cycle (this function will activate the wash-wiper cycle approx. 30 seconds).
-
Aux4 is used for Wash-Wiper UNSTOPPABLE automatic cycle (this function will activate the wash-wiper cycle approx. 30 seconds).
-
Aux5 is used for Autofocus refresh (only for external motorized lenses).
-
Aux6 is factory reserved.
-
Aux7 is factory reserved.
-
Aux8 is factory reserved.
Password and reset button (available on CR versions only)
The unit is password protected to prevent unintended limits setting. To unlock this function, the password is 16325 (Preset Call 1+6+3+2+5;
every Preset must be called within 10 seconds from the previous one). Limits unlock is enabled until a disable password is set.
To lock the limits modification, the password is 65324 (Preset Call 6+5+3+2+4; every Preset must be called within 10 seconds from the previous
one).
Pushing S1 button on the telemetry receiver board for at least 15 seconds will set the factory default limits and lock the limits modification.
Default limits
The unit is set with default values to achieve the following angles: +/- 90° Pan (left/right); +/- 90° Tilt (up/down). CR versions do not have default
pan limits.
Factory limits are about +/- 175° Pan (left/right) and +/- 100° Tilt (up/down). CR versions do not have factory pan limits.
Changing the default limits
Left Limit
Right Limit
Up Limit
Down limit
Preset
Set 70
Clear limit
Preset
Set 71
Clear limit
Preset
Set 72
Clear limit
Preset
Set 73
Clear limit
Preset
Set 80
Set limit
Preset
Set 81
Set limit
Preset
Set 82
Set limit
Preset
Set 83
Set limit
Note: setting the Pan limits (set 80 and 81) will delete all the pan saved presets.
Preset
Preset from
1
to
69
and from
100
to
150
can be used to set/call specific positions. The other presets are factory reserved and cannot be used to
set/call specific positions.
On the first command received, the unit will perform a zero-axis (in which the unit won't accept any further command). Setting preset
84
changes
this behaviour and make the unit perform the zero-axis on startup. Setting preset
74
switches back the behaviour of the unit to perform the
zero-axis on the first command received after the startup. Calling preset
92
performs a pan and tilt zero-axis, while call
90
performs a pan zero
axis and
91
performs a tilt zero axis. Calling preset
93
moves the unit to zero position (0°) both on pan and tilt axis.
Preset
Call 87
activates the front window cleaning cycle on CR versions with washer systems (similar to Preset Call 200).
Preset
Call 88
activates auxiliary output AUX1 (wiper). Auto off after 10 seconds.
Preset
Call 89
activates auxiliary output AUX2 (washer). Auto off after 5 seconds.
Preset
Call 99
calibrates the Camera Pots in case of motorized lens (
needed the first time the camera is connected
).
Preset
Call 200
activates the front window cleaning cycle on both CR and NO-CR versions with washer systems (similar to Preset Call 87).
Special auxiliary functions mode (available on CR versions only)
The unit has a Special auxiliary functions mode. This mode is useful when neither auxiliary output nor preset above 86 are available.
In this mode, the unit works as described below:
Preset
Call 1
activates wiper (same as auxiliary output AUX1 and Preset Call 88). Auto off after 10 seconds.
Preset
Call 2
activates washer (same as auxiliary output AUX2 and Preset Call 89). Auto off after 5 seconds.
Preset
Call 3
activates the front window cleaning cycle on CR versions with washer systems (same as auxiliary output AUX3 and Preset Call 200).
To enter Special auxiliary functions mode, the password is 11163 (Preset Call 1+1+1+6+3; every Preset must be called within 10 seconds from
the previous one).
To exit Special auxiliary functions mode, the password is 22251(Preset Call 2+2+2+5+1; every Preset must be called within 10 seconds from the
previous one).
7
