II_DigiTech_05_eng
9 of 20
Installation instructions
DigiTech
Motor LatchBolt lock dimensions
T5101/M/S
Fixed keypad installation instructions
Insert the keypad cable inside the hole on the safe door and connect it to the lock connector
"1/ENT". Lift the keypad membrane and, making sure that the connection cable and the
battery cable are not damaged by the keypad case, fix the screws to the relative threaded
holes on the safe door.
STANDARD mounting
VERTICAL mounting
The keypad can also be installed in a quick hooking/unhooking mode (vertical mounting).
Remove the release liner placed under the membrane
and apply the latter on the keypad case. Connect a
battery to the battery connector inside the keypad
battery compartment or, if provided, connect the
battery pack to the lock connector "2/BAT".
