Tecnogas 70048, Set-Up And Usage Manual

Page: 11 / 32

TECNOGAS manuale di installazione | setup manual 11
ENGLISH
1
inlet valve
2
Filtered water outlet pipe
3
Locking ring nut
4
Stopper
5
Drain valve
6
Vent valve
7
Magnet housing
8
Mechanical filter
9
Filter hole
10
Removable magnet
11
90° bend for horizontal installation
Components
Internal mount
1.
Unscrew the ring
3
and remove the upper part of the filter
2.
To ensure correct function the filter hole 9 should be vertically aligned to the vent valve
6
.
3.
In turn, closing the upper part of the magnetic dirt separator, the vent valve 6 must be
aligned with the drain valve
5
.
4.
Once properly positioned the components, it is necessary to fix again (without the use
of tools) the ring nut
3
.
!
This procedure has already been performed on each magnetic dirt
separator. It is only necessary in the case of maintenance operations that
require access to the filter.
Technical specifications
Maximum work pressure PN 4 bar
Water max. temp. 90 °C
Environment min. temp. 5° C
Maximum hourly flow 1,38 m3/h
Magnetic flow density 12900 Gauss
Body material
Plastimid 66 Neutro
Fittings material Ottone nichelato
Fittings diameter 3/4”