tecnoelettra AT206, User Manual

Page: 7 / 24

Cod.Doc.2550041-REV 2.2.0 gb.doc
Pagina 7
2- AT206 PANEL DESCRIPTION
This product permit to control all the functions about a generator
•
Engine command and protection module for diesel or gasoline generators
•
Measurement system for main electric values
•
Automatic control module for two different supply sources (Automatic Mains Failure)
•
Automatic changeover switch from two different supply sources (Automatic Transfer Switch)
It’s builded to monitor monophase, triphase or triphase with neutral systems in alternate current; it permit to transfer the user’s load on generator when
the mains voltage is faulty. Voltage and current detection are monophase.
2.1 - How is the package and what is included
The packing must be completely closed and it must be in good conditions.
In the package, there is the panel but there are also a pocket with a couple of connectors for auxiliary connections (a), a couple of fixing hooks (b), a
couple of spare fuses (c), the instruction manual (d) and labels with alarms list in several languages (e).
The identification plate data give all the informations about the product; you can found it on the package and on a side of the panel
WARNING : check if the product received is in accordance to the product ordered.
2.1.1 - Identification data plate
The technical plate is secured on the outside of the electric panel, it gives the main particulars and
certifies its conformity with the EEC machine directive 89/392 (attachment H). Therefore its CE
marking is valid only when mounted with machines made in accordance with the provisions of the
EEC machine directive 89/392 and subsequent amendments introduced 91/368 EEC, 83/44 EEC,
93/68 EEC.
Every time you need to carry out special maintenance, repairs or to request spare parts it is
necessary to call the Manufacturer or Dealer, always quote the serial number
.
2.1.2 - Identification plate data specifics
In =
Nominal current V = Nominal voltage on power circuits
Imax. = Maximum permitted current Vaux = Nominal voltage on auxiliary circuits
KA = Maximum current that is safe from
short circuits IP = The protection seal is IP 20 for all the type of panel
Hz = Nominal frequency Kg = Weight (only approximate and is subject to variation)
KVA = Apparent power (calculated at a 0,8
cos) Dim = Sizes (refer to dimensions of the box and do not consider any components whose
installation might modify base dimensions). The measurements are expressed as
"height x width x depth".
KW = Active power Ser.n = Indicate the serial number required to identify the product. This number must
always be quoted in requests for spare parts.
HP = Horsepower (not important) Model = Indicates the code of the control panel that enables the type to be identified.
Targa dati tecnici Identification data
plate
a b c d e