I.T.S. Ital Trade Services srl ST 1200 Operating Manual
15
4. Saw Blade Stretch Adjustment
In order to stretch the saw blade it’s
necessary to act on the nut located
on the left side of the arch
A
. You
can read the stretch value on the
scale
B
The machine is supplied with an
alloy blade and you must adjust the
stretch blade between 250 and 300
kgs. Please ask to your supplier the
right stretch to apply to the
purchased blades!
Manually rotate the main pulley for at least 20 revolutions checking the tension and that
the blade is inside the guide.
Close the protecting plates and after checking that there is any person close to the
machine, start the engine of the blade at the minimum speed and check that the blade is
running properly.
Figure 9. Nut regulating the blade stretch
Figure 10. Scale with blade stretch values in kgs
