Tecnodue I.T.S. PT 630, Operating Manual

Page: 7 / 36

I.T.S. Ital Trade Services PT 630 Operating Manual
7 77 7
2. General description and application field
Hydraulic operated butt welding machines suitable for PE,PP,PVDF and other thermoplastics pipes and fittings.
The self aligning frame and the compact dimensions make the machines highly suited for working in road constructions, ditches , aqueducts,
gas ducts , sewers and irrigation systems.
Warning: The machine has been equipped with one mobile trolley and one fixed trolley. Place the pipe to be welded on the mobile
trolley and and the pipeline end on the fixed trolley! Carefully check the pipes alignment before beginning to weld!
The machine is supplied complete of:
1) Basic machine d. 630 mm complete with a tools blue bag
2) Removable electric facing tool with safety switch
3) Removable PTFE coated heating mirror with a temperature control box.
4) Electro-hydraulic unit with accumulator and flexible hoses with quick couplings.
5) Support for facing tool and heating mirror
2.1 Basic machine
The basic machine is composed by:
•
Two cylinders on which heads are mounted two complete
clamps d. 630 mm
•
One movable clamp or d.630 mm sliding on cylinder's stem and
fixable in different positions by means of using the clamps spacers
•
A stiffening bar
•
Two side supports clamp d.630 mm
•
A frame including the hydraulic circuit with the anti-drop
quick couplings.
•
A heating mirror disconnecting device
2.2 Facing Tool
The electric facing tool is composed by:
•
The facing tool body
•
Two disks where are mounted the blades
•
An engine with a reducing gear supplied with a safety pin
that , while connected keep the facing tool hooked to the
machine.
•
A safety micro-switch allowing the engine starts only
when the facing tool is fit into the machine ,avoiding the start of
the engine out of this position.
2.3 Heating Mirror
The heating mirror is composed by:
•
The heating mirror coated with green color PTFE complete with
thermometer (the thermometer does not depend upon the power
supply and always survey the real temperature of the heating plate)
and connecting box
•
The support suitable for the heating mirror and the facing tool
where is located the connecting box
•
The electronic thermostat located on the connecting box .
•
LDU connector. (The below figure shows where the LDU connector
is located ).
LDU Connector