I.T.S. Ital Trade Services PT 630 Operating Manual
11
11
11
11
3. Heating mirror disconnecting device
You can configure the machine according to the kind of welding to be executed as per the following different ways:
•
Two fixed clamps and two moveable clamps Fig. 1
•
One fixed clamp and three moveable clamps Fig. 2
You can change from a configuration to another in a quick way by simply acting on the two spacers and on the disconnecting device.
In the first configuration of the machine the disconnecting devices is between the two moveable clamps and the two fixed clamps.
The spacers are between the two fixed clamps.
In the second configuration of the machine the disconnecting devices is between the three moveable clamps and the fixed clamp.
The spacers are between the second and third moveable clamps.
Figure 1.
Configuration 2 moveable 2 fixed clamps
Figure 2.
Configuratione 3 moveable 1 fixed clamp
Figure 3
.
On the left:
You can modify the distance between the clamps connected by
the spacers.
Fix the first clamp to the hole A and the second clamp in one of the holes
B,C,D,E
On the right (from above)
Upper and lower spacer (interchangeable) and
disconnecting device
WARNING !
Only in two confirgurations you can use the disconnecting device with spacer! In the other configuration use only the spacer to
avoid serious damages to the basic machine!
Summary of Contents for I.T.S. PT 630
