Tecnoalarm Tecnofire TF-A1-298-DE, Installation Manual

Page: 20 / 56

TFA1-298
20
2 1 3
1
+
1 1 1 1 1
+
1
2
+
1 2 3
4 5
+
1
3
+
5 4
2 3 1
+
1
ACCESS TO ACCESS LEVELS
Access level 1 is not protected by code
Access level 2
Access level 3
Access level 4
The table describes the keys on the front panel of the control panel.
5-3 - Function keys
16/02/2019 08:00:00 Access level 1
Level 2 Level 3 Level 4
Release: 2.0.00 ENG
Control panel working
Fire control panel
Key Description Operational sequence
RESET
Reset (deletion) of all prealarm, fi re alarm, technical prealarm,
technical alarm and failure noti fi cations and reset of the control
panel to normal operating condition.
1 - Press RESET
2 - Enter level 2 code
The LED and display noti fi cations are cleared.
EVACUATE
Activation of the programmed procedure for the evacuation alarm,
activation of the sirens and output modules programmed to be
activated by the evacuation alarm procedure.
1 - Press EVACUATE
2 - Enter level 2 code
3 - Con fi rm the operation
The ALARM LED turns on. The display shows Evacuation .
ACK
Acknowledges the alarms issued for prealarm, fi re alarm, technical
prealarm, technical alarm and failure. Moreover, the local speakers of
all the control panels and repeaters are muted.
N.B. The button does not mute the sirens and does not stop the
external activation devices (output modules, sirens etc.).
1 - Press ACK
The code is not required.
The
ALARM LED remains lit.
The display alarm noti fi cations remain visible.
MONITORED
Toggle of the Monitored system mode .
N.B. This function only works if the option has been programmed.
1 - Press MONITORED
2 - Enter level 2 code
The MONITORED SYSTEM LED turns on or off:
LED on = monitored, LED off = not monitored
stop/RESET
SIRENS
Stop and reset of all sirens programmed for prealarm, fi re alarm,
technical prealarm, technical alarm and failure as well as all
external actuating devices (output modules, sirens etc.) if the
acknowledgment function has been programmed for each of them.
1 - Press STOP/RESET SIRENS
2 - Enter level 2 code
The SIRENS STOPPED LED turns on.
OK
Navigation and con fi rmation keys. The arrow keys allow navigation
of the menus. Depending on the context, you can change the
displayed page and/or increase and decrease programming
parameters. The
OK key is to con fi rm the selection.
Move the cursor up - Increase the value
Move the cursor down - Decrease the value
Move the cursor left - Decrease the value
Move the cursor right - Increase the value
OK
Con fi rm the selection
ESC ESC
The ESC key allows to exit from the menu or displayed function.
BACK BACK
The BACK key allows to move the cursor to the previous position
and erase its contents
1
9
...........
The number keys allow to enter the code and select the menus and
devices in a direct way.
2 1 3
Number keys 1, 2 and 3 are accompanied by an arrows up symbol.
Depending on the context, they are numeric keys or pointing keys.
The arrows indicate the pointing boxes displayed directly above
them: access to level 2, 3 and 4.