INTRODUCTION DOMUS MODULE
The
DOMUS
expansion consists of a
DOMUS
MODULE and up to three
RELAY
MODULES. The
DOMUS
module
expands
the control board with three open collector outputs. Each output controls a relay module. The
DOMUS
module
has a
push-button
K1
to select the outputs menu and three LEDs:
L1, L2
and
L3
. Each LED is linked to a relay status. The LED is ON when
the corresponding RELAY output is closed . The
DOMUS
expansion may be used to control a variety of different applications, as for
instance
timed lights controlled by remote
,
courtesy lights
,
flashing lamp
,
electric-lock
,
traffic lights
, and
extending an alarm
system
.
TYPICAL APPLICATIONS
LIGHTS
The lights can be controlled by terminal block input, remote
key and/or gate status. The most useful functions are: ON,
ON/OFF, ON from 0 to 99 Seconds / Minutes / Hours.
DOMUS
controls up to 3 lights. The lights can be controlled
with a single command with different function for each
output (I.E. Turn On output 1 and Turn Off output 2).
ELECTRIC-LOCK
For this application you need of an
external DC power
supply
and an
electric-lock
. The electric-lock can be
controlled by terminal block input, remote key and/or gate
status. This application can be used to control additional
electric-lock.
EXTERNAL DEVICE
A control board with the
DOMUS
can command one or
more external devices. The command can be sent by
terminal block input, remote key and/or gate status. For
instance this application can be used to open or close more
devices at the same time.
www.tecnoautomazione.com
Pag. 16 / 17
