10
Power selector
Press the power button "On" the device is in max power mode.
When it is activated, Press the power button "On" again the unit will enter soft
power mode. In LOW speed, press "On" again, it will go off. Press "ON" again
to return to HIGH speed. Each cycle works this way.
As soon as it is switched on, the brush and LED lighting work. And the speed of
the brush and the power of the lighting depends on the chosen power.
- Push the handle back and forth to move the brush back and forth. - Turn the
handle to turn the brush to the left or right.
- Press the release button to remove the vacuum cleaner from its holder.
This is convenient for cleaning under furniture, sofas, seats and other less
accessible surfaces.
If necessary, connect the nozzle (15) on the bottom of the vacuum to reach
difficult accessible places.
Whatever the chosen speed, high or low:
If the battery is full, all three lights are on (A);
If the battery is half, the third light is off (B);
If the power is low, the second light goes out (C).
If the battery level is extremely low, the two first lights are off, only the last
indicator light flashes (D)
When the last indicator light flashes. The machine must be turned off and
charged. If you continue to use it, the system will stop by force when the battery
reaches the cut-off voltage. It is a protective action to prevent the battery from
being discharged too much. This is not a malfunction of the machine, just put it
back to the charge.
However, we recommend that you turn off the power immediately when the light
is flashing, which will help prolong the life of the battery.
ASPIRATE FLOORS AND CARPETS
Start the device by pressing the On / Off button.
Note: after several uses, it is advisable to check the state of cleanliness of the
brush, in order to avoid scratching sensitive surfaces.
