33
Network Camera User Manual
1. Select the user to be deleted in the user configuration list box.
2. Click the “Delete” button to delete the user.
Note
: The default administrator account cannot be deleted.
4.6.2
Online Video User
Go to Config
Security
Online User to view the user who is viewing the live video.
4.6.3
Block and Allow List
Go to Config
Security
Block and Allow Lists.
The setup steps are as follows:
Check the “Enable address filtering” check box.
Select “Block/Allow the following address”, IPv4/IPv6/MAC and then enter IP address or
MAC address in the address box and click the “Add” button.
4.6.4
Security Management
Go to Config
Security
Security Management as shown below.
In order to prevent against malicious password unlocking, “locking once illegal login” function
can be enabled here. If this function is enabled, login failure after trying six times will make the
login interface locked. The camera can be logged in again after a half hour or after the camera
reboots.
For some specified versions, anonymous login with a private protocol can be enabled here (if
your camera has no such function, please skip the following instructions). If this function is
enabled, enter http://host:port/Anonymous/1[2/3] (eg.
http://192.168.226.201:80/Anonymous/1) via web browser to access the camera. 1 indicates
main stream; 2 indicates sub stream; 3 indicates third stream. Only video can be viewed by this
means and no other operations can be done.
