28
Network Camera User Manual
Select “Enable” to enable the RTSP function.
Port
: Access port of the streaming media. The default number is 554.
RTSP Address
:
RTSP Address
: The RTSP address (unicast) format that can be used to play
the stream in a media player.
Multicast Address
Main stream
: The address format is
“rtsp://IP address: rtsp port/profile1?transportmode=mcast”.
Sub stream
: The address format is
“rtsp://IP address: rtsp port/profile2?transportmode=mcast”.
If “Allow anonymous login…” is checked, there is no need to enter the username and password
to view the video.
If “auto start” is enabled, the multicast received data should be added into a VLC player to play
the video.
Note
: 1. This camera support local play through a VLC player. Enter the RTSP address (unicast
or multicast, eg. rtsp://192.168.226.201:554/profile1?transportmode=mcast) in a VLC player to
realize the simultaneous play with the web client.
2. The IP address mentioned above cannot be the address of IPV6.
3. Avoid the use of the same multicast address in the same local network.
4. When playing the video through the multicast streams in a VLC player, please pay
attention to the mode of the VLC player. If it is set to TCP mode, the video cannot be played.
5. If the coding format of the video of the main stream is MJPEG, the video may be
disordered at some resolutions.
4.5.7
UPNP
If this function is enabled, the camera can be quickly accessed through the LAN.
Go to Config
Network
UPnP. Enable UPNP and then enter UPnP name.
