background image

There  still  might  be  deviation  in  technical  data,  functions  and  operations  description,  or

errors in print. If there is any doubt or dispute, please refer to our final explanation.

Upgrade the reader software or try other mainstream reader software if the Guide (in PDF

format) cannot be opened.

All  trademarks,  registered  trademarks  and  the  company  names  in  the  Manual  are  the

properties of their respective owners.

Please visit our website, contact the supplier or customer service if there is any problem

occurred when using the device.

If there is any uncertainty or controversy, please refer to our final explanation.

Important Safeguards and Warnings 

Electrical Safety 

All installation and operation should conform to your local electrical safety codes.

The power source shall conform to the requirement of the Safety Extra Low Voltage (SELV)

standard,  and  supply  power  with  rated  voltage  which  conforms  to  Limited  power  Source

requirement according to IEC60950-1. Please note that the power supply requirement is

subject to the device label.

A  readily  accessible  disconnect  device  shall  be  incorporated  in  the  building  installation

wiring.

Make sure if the camera power adapter meets the camera operating voltage requirement

before powering up the device (The material and length of the power cable might influence

the device voltage).

Prevent the power cable from being trampled or pressed, especially the plug, power socket

and the junction extruded from the device.

We  assume  no  liability  or  responsibility  for  all  the  fires  or  electrical  shock  caused  by

improper handling or installation.

Environment 

Do not aim the device at strong light to focus, such as lamp light and sun light.

Transport, use and store the device within the range of allowed humidity and temperature.

Keep  the  camera  away  from  water  or  other  liquid  to  avoid  damages  to  the  internal

components.

Keep sound ventilation to avoid heat accumulation.

Heavy  stress,  violent  vibration  or  water  splash  are  not  allowed  during  transportation,

storage and installation.

Pack  the  device  with  standard  factory  packaging  or  the  equivalent  material  when

transporting the device.

It is recommended to use the device together with lightning arrester to improve lightning

protection effect.

It is recommended to get the grounding holes to be grounded to enhance the reliability of

the device.

It is recommended to use qualified video transmission cable to improve video quality. It is

recommended to use RG59 coaxial cable or higher standard.

Summary of Contents for HDE5P2W2-A














Reviews: