User Manual
28
We introduced setting PTZ parameters previously in section 5.3.6.2 – PTZ Set. Here
we will discuss how to operate PTZ controls.
Click the [
] icon to
enter into [PTZ control] menu shown as Picture5-60. Now
user can control the camera with Pan, Tilt and Zoom capabilities.
Click [Zoom-/+] button to zoom in / out the image; Click [Focus -/+] button to focus
the image; Click [Iris -/+] button adjust iris to open or close.
Cruise Set
Open auto cruise function on PTZ setting menu if you want to setup cruise function
(system default: off), and set up cruise channel, cur point and total quantity and stop time
etc
How to set pre-set point
Total:
set up pre-set point quantity
Cur Point:
indicates starting point cruised. System default point is 01. The model
support up to 255 pre-
set points.
Stop time:
sets the stop time at each point
GOTO:
allow you go to a specific preset point.
Set:
allow you set a set of specific preset points of a PTZ camera.
1.
Select a camera you desire to set a preset point;
2.
Adjust the camera in a desired direction;
3.
Click [Set] to set the point as preset point;
4.
Click [Save] to save the preset point;
5.
Follow the above step to add one more preset point.
Save:
save all the preset points
Clean
: allow you delete one selected preset point.
Note
: Up to 254pre-sets per one camera can be stored. However, actual preset
quantity differs depending on PTZ performance.
5.7 PIP Mode
You can display a Picture-in-Picture in live mode. PIP has two display modes, including
1X1 display mode and 1X2 display mode.
5.8 Record search
You could enter into [Record Search] menu from Pop-up menu conveniently and quickly
and search/playback the record histories.
We introduced Record search details previously in
Section 5.3.3.1.
1x1 display mode
1x2 display mode
Summary of Contents for QV-3028
Page 1: ...User Manual...
