User Manual
22
external alarm is triggered, the corresponding channel will be switched to the full
screen mode.
Record Channel:
allow you select channels you want to record.
Post Recording:
you can set how long alarm record will last when alarm ends (30s,
1minute
，
2minute
，
5minute);
Copy:
allow you copy all the setting of one channel to other ones.
Alarm Type
Function
Video Loss
Sends alarm when DVR can’t receive video signal (such as camera damage, cable broken or
damaged or power supply malfunction).
Motion
Detection
When an object moves into motion detection area, alarm will be triggered. You can adjust
sensitivity level to suit the needs of your actual application environment.
I/O Status
System can convert alarm signal triggered by external sensor into signal identified by system.
HDD loss
When Hard Drive is not detected (HDD damage, power supply malfunction), or HDD
auto-overwrite is off, and free space is not enough, an alarm will be triggered.
5.3.6 Device
5.3.6.1 HDD Set
Click [Main menu
Device
HDD] to enter into the interface shown as Picture 5-43.
Picture 5-43
When DVR is connected to a HDD, the system will automatically detect if HDD is normal
or not;
If the cable connected to HDD is loosen or HDD is abnormal, HDD status will be
shown as “No Disk”, or, If HDD need to be formatted, status will be shown as “no format”,
otherwise, the HDD status will be shown as “Normal”
Picture 5-44
List 5-1
This figure is only for 16CH-CIF model reference
This figure is only for 16CH-CIF model reference
Summary of Contents for QV-3028
Page 1: ...User Manual...
