TSR 2800-30 Hardware Installation Manual
-2-
Chapter 1 TSR 2800-30 Modularized Router
The document describes the characteristics and parameters of TSR 2800-30
router and gives an overview of TSR 2800-30 router.
1.1 Standard Configuration
TSR 2800-30 modularized router has four kinds of ports: two 10/100/1000M
electric-optical-multiplexed ports, one console port, and one USB port. For details,
see table 1-1.
Table 1-1 Attributes of the necessary port
Port Attribute
Gigabit Ethernet
port
A 10/100/1000M auto-adaptation UTP (RJ45) port, having LINK/ACT
100Mbps indicators
Console port
An RJ45 port with a rate of 1200bps to 115200bps, which has no
indicators
USB port
USB2.0 port
There are also three interface card slots, one power socket, one power on-off, one
grounding column, one ventilation vent and one long-shape ventilation vent.
The front template of the TSR 2800-30 modularized router is shown the following
figure:
Table 1-2 Parts at the front template of TSR 2800-30
No. Abbrev.
Name
Remarks
1 ALARM
System alarm indicator
When the system runs abnormally,
it is on.
2 RUN
System indicator
It is on after the system is
successfully started.
3 Console
Console port
A port used for system control
4 USB0
USB port
USB port
5 USB1
USB port
USB port
6 LINK/ACT
GE1 indicator
When GE1 is linked, it is on; when
data is forwarding, it is off.
7 LINK/ACT
GE0 indicator
When GE0 is linked, it is on; when
data is forwarding, it flickers.
8 GE
Ethernet
10/100/1000M
port1
The port is connected by the
twisted pair.
