Techpro NVR-ELT-16, User Manual

Page: 222 / 241

296
7 FAQ
Questions Solutions
NVR can not boot up
properly.

Input power is not correct.

Power connection is not correct.

Power switch button is damaged.

Program upgrade is wrong.

HDD malfunction or something wrong with HDD ribbon.

Seagate DB35.1, DB35.2
，
SV35 or Maxtor 17-g has compatibility
problem. Please upgrade to the latest version to solve this
problem.

Front panel error.

Main board is damaged.
NVR often automatically
shuts down or stops
running.

Input voltage is not stable or it is too low.

HDD malfunction or something wrong wit the ribbon.

Button power is not enough.

Front video signal is not stable.

Working environment is too harsh, too much dust.

Hardware malfunction.
System can not detect
hard disk.

HDD is broken.

HDD ribbon is damaged.

HDD cable connection is loose.

Main board SATA port is broken.
There is no video output
whether it is one-channel,
multiple-channel or
all-channel output.

Program is not compatible. Please upgrade to the latest version.

Brightness is 0. Please restore factory default setup.

Check your screen saver.

NVR hardware malfunctions.
I can not search local
records.

HDD ribbon is damaged.

HDD is broken.

Upgraded program is not compatible.

The recorded file has been overwritten.

Record function has been disabled.
Video is distorted when
searching local records.

Video quality setup is too low.

Program read error, bit data is too small. There is mosaic in the full
screen. Please restart the NVR to solve this problem.

HDD data ribbon error.

HDD malfunction.

NVR hardware malfunctions.
Time display is not
correct.

Setup is not correct

Battery contact is not correct or voltage is too low.

Crystal is broken.