Techpro HYBDVR-FEO8 User Manual Download Page 11

Page: 11 / 270

FEATURES AND SPECIFICATIONS

1.1

Overview

The hybrid standalone series DVR is an excellent digital monitor product designed for

security field.

It adopts embedded Linux OS to maintain reliable operation. Popular H.264 compression

algorithm and G.711 audio compression technology realize high quality, low bit stream.

Unique frame by frame play function is suitable for detailed analysis. It has various

functions such as record, playback, monitor at the same time and can guarantee audio

video synchronization. This series product has advanced technology and strong network

data transmission function. It supports analog signal and the digital signal at the same

time. It can connect to multiple-channel network cameras and support network camera

setup function. It can be used as a small management center to manage the network

cameras.

This series device adopts embedded design to achieve high security and reliability. It can

work in the local end, and at the same time, when connecting it to the professional

surveillance software (PSS), it can connect to the security network to realize strong

network and remote monitor function.

This series product can be widely used in various areas such as banking,

telecommunication, electric power, interrogation, transportation, intelligent resident zone,

factory, warehouse, resources, and water conservancy.

1.2

Features

This series product has the following features:



Analog and digital mixed input

Support analog and digital signal simultaneously. It can connect to multiple-channel high

definition IPC.



Real-time surveillance

Support analog output port, VGA port and HDMI port. Realize the surveillance through the

monitor or displayer. Support HDMI, VGA, and TV output at the same time.



Storage function

Special data format to guarantee data security and can remove the risk of the vicious data

modification. Support digital watermark.



Compression format

Support multiple-channel audio and video. An independent hardware decodes the audio

and video signal from each channel to maintain video and audio synchronization.

Summary of Contents for HYBDVR-FEO8















































































































































































































































































Search results

Summary of Contents for HYBDVR-FEO8

Reviews:

Related manuals for HYBDVR-FEO8

Brands by name

Popular brands

Techpro HYBDVR-FEO8, User Manual

Search results

Summary of Contents for HYBDVR-FEO8

Reviews:

Related manuals for HYBDVR-FEO8

Brands by name

Popular brands