Glue the two carbon fiber rods to the
.
stabilizer
Cut two pieces of carbon fiber rod of 160mm.
Install them as above picture.
4
.
landing Gear
Push the landing gear strut into the precut hole
in the fuselage side, then twist the landing gear
strut so that the axle is straight.When satisfied
with the alignment, glue the landing gear strut to
the fuselage side and the bottom wing.
Install the two wheels and wheel chocks.
Keep 1mm distance between wheel and its
chock. Apply some foam-friendly thick C/A
to glue the chocks.
Glue the two wheel covers together.
Slide one wheel cover onto each axle and up
against the wheels. Align the wheel covers, then
glue them securely to the axles.
Cut one piece of carbon fiber rod of 50mm, then
insert it to the fuselage and glue it.
