3
.
Wing
Glue the bottom wing to the fuselage, make sure
the slots in the wing are pushed firmly over the
mounting tabs on the fuselage.
Glue the h
to
orizontal stabilizer
the fuselage.
Glue the two outer wing struts to the bottom
wing, make sure the wing struts are
perpendicular to the wing.
A
C
D
B
Make sure A
=
B
,
C
=
D
.
Cut two carbon fiber strips as long as the slots of
the outer wing struts, then glue them to the slots.
Glue the top wing to the center wing mount and
the outer wing struts, make sure the wing is
perfectly flat while the glue cures.
Glue the two carbon fiber rods to wings.
Push the carbon fiber rod down through the
outer hole in the top wing
(A)
and slide it
through the hole in the outer wing strut
(B)
.Push
the end of the carbon fiber rod through the inner
hole in the bottom wing
(C)
.
A
C
B
