Techogas RN483GXSS, Installation Manual

Page: 17 / 32

17
Gas Requirements
STEP 4: BROILER BURNER (MAIN)
Loosen the 2 screws on left and right
sides and pull out the burner from its
support burner from its support.
ATTENTION:
pay extra attention
to avoid damage to the igniter and
thermocouple.
Using a 7 mm or 10 mm sochet wrench
to unscrew the nozzle. Replace the noz-
zle using the conversion set sup-
plied with the range or by a Tecno autho-
rized parts warehouse. Each nozzle has a
number indicating its flow diameter prin-
ted on the body. Consult the table on
“Specifications Technical data “ para-
graph for matching nozzles to burners.
ATTENTION:
Air adjustment is not needed.
STEP 5: BROILER BURNER (auxi-
liary)
To replace the noozle of the small oven
burner start by removing the bottom
panel
Loosen the 2 screws in front of the bur-
ner and move it on the side in order to
be able to reach the noozle.
SCREWS
Pay extra attention to avoid damage to
the igniter and thermocouple.