EN6
Trouble shooting
If your clock displays irrelevant time or does not function properly,
which maybe caused by electro-static discharge or other
interference. Unplug the DC jack at the back of the unit, open the
battery cover and take out the batteries. Then re-plug the DC jack
and reinstall batteries by observing the c/- polarity. Your
unit will be reset to default settings and you need to set it again.
Specifications
Default settings:-
Time
0:00, 24HR format
Sound sensor sensitivity
LO
Care of the product
1. Place your unit on a stable surface, away from sources of
direct sunlight or excessive heat or moisture.
2. Protect your furniture when placing your units on a natural
wood and lacquered finish by using a cloth or protective
material between it and the furniture.
3. Clean your unit with a soft cloth moistened only with mild soap
and water. Stronger agents such as Benzine, thinner or similar
materials can damage the surface of the unit. Make sure the
unit is unplugged before cleaning.
4. Do not mix old and new batteries. Do not mix alkaline,
standard (carbon-zinc), or rechargeable (nickel-cadmium)
batteries.
5. If the unit is not to be used for a prolonged period, such as a
month or longer, remove the batteries to prevent possible
corrosion. Should the battery compartment become corroded
or dirty, clean the compartment thoroughly and replace the
batteries.
6. Do not open the inner back case or tamper with any
components of this clock.
