EN3
B7
– DC power socket
B8
– Stand
B9
– 3- meter white power cable
B10
– AC/DC power
adapter
B11
– AC power socket
To power the clock
Plug in the 5V-1.2A AC/DC adaptor
HX075B-0501200-AG-001
(included) to an AC wall outlet and then the DC jack to the DC
power socket on the back of your clock.
To install back-up batteries
Your clock requires 1 x CR2032 battery (not included) to provide
backup power to it in the event of a temporary power interruption.
1. Place your clock face down on a flat and soft surface.
2. Use a coin to turn the battery cover anti-clockwise at the back
of your unit.
3. Insert one new lithium cell
“CR2032” battery into the battery
compartment by obser
ving the “+” polarity facing upward.
4. Replace the battery cover and turn clockwise to lock it.
If AC power is interrupted and backup batteries are being used, the
time and all settings of your unit will be kept. The mood light does
not function and the time display does not light up.
