EN5
3. Press the
SET
button and
the time digits change to “
24Hr
” and
flash. Press
+
or
-
to select “24Hr” or “12Hr” time format. When
12Hr time format is selected,
”
PM
”
LED appears.
4. Press the
SET
button and
“LO”
flashes, press
+
or
-
to select
“OFF”
, “
HI
” or “
LO
” sensitivity of the sound sensor.
5. Press the
SET
button to confirm and exit setting. The set time
is displayed.
Note:
Press and hold
+
or
-
will accelerate the setting process.
The clock exits the set mode when no key is pressed for 10
seconds.
Using white light / mood light
At normal time display, face the clock up front at a distance of 1
meter. Clap your hands once to turn on the white mood light. Clap
again to turn on the color changing mood light. Clap once again to
stop the mood light at a particular color. Clap again to turn off the
mood light.
Off -> white light -> mood light (changing color) -> mood light
(fixed color) -> off
Selecting the
“HI”
sensitivity of the sound sensor in point 4 above
will increase the distance to 2.5 to 3 meters but the clock will
becomes very sensitive to sound and changes its color more
frequently.
To adjust the brightness of the display and white / mood light
Rotate the
TIME
brightness dial at the back side of the clock to set
display brightness.
Rotate the
MOOD LIGHT
brightness dial at the back side of the
clock to set mood light brightness.
Turn the selected dial upward for higher brightness or downward
for lower brightness.
