11
2. Protect it from direct sunlight.
3.
Don’t install it near water or in places with higher humidity.
4. We recommend to use a dedicated power-supply circuit. This should be fitted with a combined
MCB/RCD with following characteristics:
Type C10, if the main voltage is 200-240 Vac
Type C16, if the main voltage is 100-120 Vac
If it is not possible to connect it to dedicated power supply circuit with this specification, ask an
electrician for advice.
TRANSPORT
Transport it very carefully, because it could get unstable and turn over.
Check that this device is level during transport.
This product has two fixed front wheels for easy transport.
Lift slightly the sides and push it forwards or backwards to transport it.
At least two people are required for safe transport.
If it is impossible to use these wheels, because of surface unevenness etc., use standard
lifting and transport equipment.
LEVELLING
This device must be level before using.
If one of these two stands (A or B) doesn’t touch the ground, the stand (foot) A must be adjusted using
the provided spanner.
Insert the tool (C) into the hole and open the panel (D).
Loosen the lock nut (E).
Screw or unscrew the stand (foot) A until the both stands (feet) touch the floor.
Tighten the lock nut (E) and complete adjustment.
Close panel (D).
