16
Power cord is damaged.
Contact the technical support
service.
The
power
cord
is
not
connected to the unit.
Connect the power cord to the
unit.
The main switch is off.
Turn on the main switch.
The main switch often turns
itself off.
Contact the technical support
service.
The treadmill is too noisy.
The treadmill is not properly
levelled.
Adjust the position and level
with the rear adjustment foot.
The treadmill is not centred.
Align the treadmill as described
in the paragraph “Aligning the
treadmill”.
Incorrect or unreliable data.
The treadmill is next to a source
of
radio
interference
(i.e.
electrical appliances).
Move the treadmill elsewhere or
move the electrical appliances.
The side handgrips do not stay
in place.
The handgrip anchor level is not
fully raised.
Remove the handgrips and refit
them onto the frame.
The treadmill is blocked, with
the screen off and with the red
light of the start button steadily
on.
The software update has not
been completed.
Position the tablet on the
control panel.
Start the MYRUN app.
Connect to the treadmill.
Wait for the update to complete.
The power supply trips out.
The mains electrical system
may not be suitable.
Check that the characteristics of
the mains electrical system
meet the given requirements.
The upper part of the unit does
not seem stable.
Screws (
A
) are not tightened
sufficiently.
Tighten screws (
A
) until the unit
is stable.
There are high voltages inside the motor compartment, therefore the guard must be removed
only by authorized personnel. Only authorized personnel may perform internal repairs.
