Technogym EXCITE+ VARIO, Technical Service Manual

Page: 153 / 171

- VARIO: Technical service guide- Ver. 2.1
Page 9.21
9.3.6. S
TANDARD SETTINGS
This function clears the operating data of the machine and simultaneously resets the brake board
parameters to their default values. To access this menu, when the display shows:
STANDARD SETTINGS ?
press ENTER , the following message appears:
CONFIRM ?
Press ENTER again to reset all parameters to their default values, or return to the upper menu level
by pressing CLEAR for a few seconds.
This function does not alter the language and the TV standard setting.
9.3.7. L
OW KIT MENU
This function directly accesses the firmware of the brake board. To access this menu, when the
display shows:
LOW KIT MENU
press ENTER . This function is structured as follows:
LOW KIT MENU
Low Kit Version
Low Kit fault code
9.3.7.1. Low kit version
This function displays the brake board firmware version. To access this menu, when the display
shows:
LOW KIT VERSION
press
ENTER , the following message appears:
X.Y.Z
Where:
•
X = KERNEL
•
Y = Brake Board
•
Z = Brake Table
Which identifies the firmware version.